HP 6212 - Manual (Page 44)

44 May 2004 6212-A2-GB20-00
5.3.2 Disable the DHCP
STEP 1: Click on DHCP from the menu bar.
STEP 2: Choose a DHCP entry, then click on Delete.
5.4 DHCP Relay
The DHCP packet format is based on a BootP packet. As a result, DHCP uses the BootP relay
agent to forward DHCP packets. This scheme provides interoperability between existing BootP
clients and DHCP servers. The BootP relay agent uses the same criteria and methods for
forwarding both DHCP and BootP packets. The DHCP Relay is disabled by default. To enable it
complete the following steps:
STEP 1: Access the DHCP Relay screen by clicking on DHCP on the Advanced Menu, and then
clicking on the DHCP Relay tab.
STEP 2: In the DHCP Relay field, select Enable, and enter the IP Address you want to receive
BOOT REQUEST or DHCP packets from clients.
STEP 3: Click on the Apply button.