Hobart Welding Products HANDLER 125 - Manual (Page 36)

OM-947 Page 32
9-4. Holding And Positioning Welding Gun
.
Welding wire is energized when gun trigger is pressed. Before lowering helmet and pressing trigger, be sure wire is no more than 1/2 in. (13 mm)
past end of nozzle, and tip of wire is positioned correctly on seam.
1 Hold Gun and Control Gun
Trigger
2 Workpiece
3 Work Clamp
4 Electrode Extension (Stickout)
Solid Wire − 3/8 to 1/2 in.
(9 to 13 mm)
Flux Cored Wire − 1/2 to 5/8 in.
(13 to 16 mm)
5 Cradle Gun and Rest Hand on
Workpiece
2
3
5
4
90
°
90
°
0
°
-15
°
45
°
45
°
1
0 ° -15 °
S-0421-A
End View of Work Angle Side View of Gun Angle
GROOVE WELDS
End View of Work Angle Side View of Gun Angle
FILLET WELDS