Hobart Welding Products HANDLER 125 - Manual (Page 18)

.
A complete Parts List is available at www.HobartWelders.com
OM-947 Page 14
5-2. Process/Polarity Table
Process Polarity
Cable Connections
Cable To Gun Cable To Work Clamp
FCAW − Self-shielding wire −
no shielding gas
DCEN − Straight Polarity Connect to negative (−)
output terminal
Connect to positive (+) output
terminal
GMAW* − Solid wire with
shielding gas
DCEP − Reverse polarity Connect to positive (+) out-
put terminal
Connect to negative (−) output
terminal
* Unit must have MIG conversion kit 195 158 installed.
5-3. Changing Polarity
1 Lead Connections For Direct
Current Electrode Negative
(DCEN)
2 Lead Connections For Direct
Current Electrode Positive
(DCEP)
Always read and follow wire
manufacturer’s recommended po-
larity, and see Section 5-2.
Close door.
Ref. 210 428
1 2