Hobart Welding Products HANDLER 125 - Manual (Page 29)

.
A complete Parts List is available at www.HobartWelders.com
OM-947 Page 25
7-6. Cleaning Gun Liner
804 241-A / 803 838-A
! Turn Off welding power source.
1 Nozzle
2 Contact Tip
3 Adapter
Head
Tube
Tools Needed:
8 mm
Lay gun cable out straight,
and blow out liner.
Remove nozzle. Cut off wire
at contact tip, and remove
contact tip and tip adapter.
.
Thread wire according to
Section 5-9.
Reassemble drive cover
and gun in reverse order
from taking it apart.
Open pressure assembly. Retract
wire from liner onto spool.
.
Hold wire tightly to keep it
from unraveling. Secure
end of wire at spool.
Remove screws (3) from
cover, and remove cover
from wire drive assembly.
8 mm
1
2
3