beautypg.com

Back panel features for the 99ex, Back panel features for the 99ex -8, Belo – Honeywell DOLPHIN 99EX User Manual

Page 34: Image/scan engine window, Rear speaker, Fastener for the stylus tether, Flashlight, Camera flash, Color camera, Hand strap

background image

3 - 8

Back Panel Features for the 99EX

Battery Door

The battery door secures the Li-ion or Li-poly battery pack in the terminal’s battery well. For
information on how to remove the battery, see

Replacing the Main Battery Pack

on page

2-3.

Color Camera

The 3.1-Megapixels Resolution color camera provides easy picture capture with Automated
Camera Control (ACC). Additional features include automated picture profiles and an
Application Programming Interface (API).

Fastener for the Stylus Tether

The Stylus Tether helps prevent accidental loss when the stylus is not stored in the stylus slot.
A stylus tether is a coiled, elastic cord that tethers the stylus to the terminal. Secure one end
of the cord to the back panel of the terminal and the other end to the stylus.

Flashlight/Camera Flash

The flashlight/camera flash is located on the back panel of the terminal. When used as a
Flashlight, press the Blue key +

key to turn the flashlight on or off. When used as a

Camera Flash with the terminal’s color camera, the flash is controlled by the camera
application.

Hand Strap

The 99EX comes with a removable, elastic hand strap.

Image/Scan Engine Window

The available image engines read and decode linear, stacked linear (e.g., PDF417), and 2D
matrix bar code symbologies. The available image engines contain a laser aimer for greater
accuracy. The laser apertures for the imaging engines’ laser aimers are contained behind this
window. For more details, see

Using the Scan Image Engine

on page

4-1.

Memory Card Socket and SIM Card Socket

The memory card socket provides the user with the option to expand the terminal’s memory
capacity using industry-standard microSD or microSDHC memory interfaces. The expansion
socket is located under the main battery in the battery well.

The card socket for the Subscriber Identity Module (SIM) is also located under the main battery
in the battery well. See

SIM Card Installation

and

SIM Card Requirements

, on page

9-3

for

additional information.

When the protective SIM/memory card door, battery pack, and the battery door are properly
installed, the memory card is sealed against moisture and particle intrusion, read/write data is
stored securely, and the terminal’s environmental rating is preserved; see

Installing a Memory

Card

on page

3-17.

Rear Speaker

The integrated rear speaker sounds audio signals as you scan bar code labels and enter data.
The integrated speaker also supports playback of wave and MP3 files, software mixer, and
Speakerphone for WWAN/GSM audio. The operating frequency range is 600-3000Hz at
>90dB.