Enabling the wwan radio, Gsm/hspa+ global radio dolphin models, Voice communication – Honeywell DOLPHIN 99EX User Manual
Page 113: Audio modes, Voice communication -5 audio modes -5, Gsm/hspa+ global radio, Dolphin models, Calls. see
9 - 5
Enabling the WWAN Radio
By default, the WWAN radio is not enabled after a factory reset. Verify the status of the radio in the Dol-
phin Wireless Manager.
Tap
on the Home screen to access the Dolphin Wireless Manager.
If the WWAN radio is OFF, tap the rectangle to enable or turn ON the radio.
GSM/HSPA+ Global Radio Dolphin Models
Voice Communication
You can use the Dolphin terminal as a phone over the GSM radio.
Audio Modes
The front panel of the 99EX contains both a speaker and a microphone that you can use to send and
receive audio signals over the GSM network, see
There are two audio modes:
• Handset Mode - The front speaker is used for receiving handset voice calls and the front panel
microphone provides audio input to the terminal.
• Hands-Free Mode - Hands-free mode is when you use the rear speaker as a speakerphone. To
switch to speakerphone, tap on the speaker button in the Dialer window, see