HANNspree LT16-26U1-000 - Manual (Page 40)

39
2.4 Using the TV
2.4.1 Using the Remote Control
For best results, use the remote control within a proper distance from the
front of the TV. Do not exceed an angle of 30 degrees when pointing at the
TV.
Notes:
• The operational distance may be shortened when the signal sensor is
directly exposed to strong light.
• Aim the transmitter on the remote control at the signal sensor and
ensure that there are no obstacles between them.
2.4.2 Turning the TV On and Off
1
Press on the remote control or on the control panel. The
power LED indicator on the front of the TV changes from red to green,
indicating that the power is on.
2 Press or again. The power LED changes from green to red,
indicating that the TV is off.
2.4.3 Selecting Channels
• Press CH
S on the remote control or
on the control panel to
increase the channel number by one. Press CH
T or
to
decrease the channel number by one.
• Enter the specific channel number by pressing the number buttons
on the remote control. The channel number is displayed on the
screen.
POWER
POWER
CH
CH