HP 760c User Manual

Page 53

Fine-Tuning the Projector

The default setting for the Password Protect function is

OFF

. Follow

these steps to turn password protection on:

1. Press the

Freeze

button on the remote control for about five

seconds.

You see this screen:

2. Use the

pointer button to set

Power ON Protect

Then press

Enter

3. Press

Esc.

4. Select

Password

and press

Enter

5. When you see a message asking if you want to change the

password, select

Yes

and press

Enter

6. Hold down the

Num

button on the remote control and use the

numeric keypad to enter a four digit password. (The default
setting is 0000.)

7. When you see a confirmation message, reenter the password.

Then press the

button to exit the screen.

8. Press the

Num

button on the remote control to deactivate the

numeric keypad.

9. If you want to disable the password temporarily, select

Timer

and

press

Enter

. Then hold down the

Num

button while you use the

numeric keypad to enter the number of hours (from 0 to 9999)
that you want the password feature disabled. If you want the
projector to request the password every time it is turned on, set
the timer to

caution

If you lose the remote
control, you will not be able
to enter the password. Keep
the remote control in a safe
place at all times.

Montreal User's Guide.book Page 53 Tuesday, April 19, 2005 11:27 AM