HP 760c User Manual

Page 23

Displaying and Adjusting the Image

If your image is still distorted, you can correct it using the Keystone
buttons on the projector’s control panel or the projector’s Setting
menu.

Using Keystone Correction

To adjust your image when it is wider on the top or bottom, do the
following:

■

Press one of the two triangular buttons on the projector’s control
panel, as shown below. Continue pressing the button until you
are satisfied with the shape of the image.

■

Or press the

button on the remote control or projector,

select the

Setting

menu, and press

Enter

From the Setting menu, select

Keystone

and press

Enter

. Use

the

pointer button on the remote control to adjust the

keystone setting as needed.

If the image becomes uneven, decrease the sharpness setting. (See
page 49.)

Keystone correction

note

The image will be slightly
smaller after adjusting. If
it’s important to maintain
the correct aspect ratio, use
the menu system to perform
keystone correction, then use
the remote’s

Resize

button

to adjust the aspect ratio. See
page 32.

Montreal User's Guide.book Page 23 Tuesday, April 19, 2005 11:27 AM