HP 760c - Manual (Page 10)

10 Welcome
Unpacking the Projector
After unpacking the projector, make sure you have all the parts shown
below:
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location. If you are moving the projector by
hand, use the carrying case. See page 11 for ordering information, and
page 66 for transportation instructions.
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■ To receive an S-Video signal, you’ll need an S-Video cable. One
may be provided with your video equipment, or you can purchase
one from Epson; see page 11.
■ To receive a component video signal from a VCR or other video
device, you’ll need a component video cable. You can purchase
one from Epson; see below.
Projector
Remote control and
batteries
Power cable
VGA computer cable
USB cable
Audio adapter
Carrying case
Montreal User's Guide.book Page 10 Tuesday, April 19, 2005 11:27 AM