Hamilton Electronics A 6436 IBS - Manual (Page 32)

PACKAGE ONE - MAS G 6233 IBS MAS
A
FRAMING DIMENSIONS
STANDARD FEATURES STANDARD CODES
B CD
10” Diameter x 1/2” Deep
Recess Around Drain Core
33” 62 17” 16”
UPC/SKU NUMBERS
: e t a D : d e n g i S Contact Phone Number:
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model. NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
Praxis Quality Installation Assurance Program Information: Phone: (800)-759-7744 ext: 29.
Customer Service: (800)-443-7269 Fax: (731)-925-0379
This model included in the PRAXIS QUALITY INSTALLATION ASSURANCE PROGRAM.
Important installation procedures MUST be followed for the fixture to be granted a warranty.
ANSI Z124.2
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
Left Hand Valve:
1”
4
Right Hand Valve:
CONTRACTOR CONTRACTOR
MAS COMPLIANCE REQUIREMENTS
Unit must be installed into
a recessed pit -or- build up
finished floor to comply with
MAS threshold guidelines.
For MAS compliance with seat: Installed accessories must include: L-shaped padded fold up seat, horizontal L-grab bar, pressure
balancing mixing valve, hand held shower with 30” slide bar (on back wall within reach of seated user), vacuum breaker and 60”
hose. Unit and accessories must be installed per MAS and Praxis guidelines.
High gloss gelcoat finish
Low threshold entry
Molded soap dishes
Padded fold up seat
Stainless steel grab bar
THIS ORDER WILL NOT BE PROCESSED UNLESS THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR
IS PROVIDED. FOR ORDERS OF FOUR OR MORE UNITS, PARTICIPATION IN THE PRAXIS QUALITY
INSTALLATION ASSURANCE PROGRAM IS MANDATORY FOR ACTIVATION OF PRODUCT WARRANTY.
ATTENTION PLUMBING CONTRACTOR!!!
No modifications accepted (Packaged units only)
MASSACHUSETTS
ARCHITECTURAL
ACCESS BOARD
MAS
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.