Hamilton Electronics A 6436 IBS - Manual (Page 16)

For MAS compliance, installed accessories must include peened L-grab bar, padded fold up seat, pressure balancing mixing valve,
hand-held shower with 30” slide bar, vacuum breaker and 60” hose. Unit must be installed so threshold is no more than 1/2” above
the finished floor. Unit and accessiories must be installed per MAS and Praxis Guidelines.
PACKAGE ONE - MAS A 4136 IBS MAS
A
FRAMING DIMENSIONS
STANDARD FEATURES STANDARD CODES MASSACHUSETTS
ARCHITECTURAL
ACCESS BOARD
B CD
10” Diameter x 1/2” Deep
Recess Around Drain Core
Unit must be installed into
a recessed pit -or- build up
finished floor to comply with
MAS threshold guidelines.
36 18 18”
Durable cast acrylic finish
Low threshold entry
Corner accessory shelf
Integral dome
Padded fold up seat
Stainless steel curtain rod
Stainless steel grab bars
UPC/SKU NUMBERS
: e t a D : d e n g i S Contact Phone Number:
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model. NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
Praxis Quality Installation Assurance Program Information: Phone: (800)-759-7744 ext: 29.
Customer Service: (800)-443-7269 Fax: (731)-925-0379
This model included in the PRAXIS QUALITY INSTALLATION ASSURANCE PROGRAM.
Important installation procedures MUST be followed for the fixture to be granted a warranty.
ANSI Z124.2
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
MAS
Left Hand Valve:
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.
1” 1”
4 4
41
1”
2
Right Hand Valve:
CONTRACTOR CONTRACTOR
MAS COMPLIANCE REQUIREMENTS
THIS ORDER WILL NOT BE PROCESSED UNLESS THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR
IS PROVIDED. FOR ORDERS OF FOUR OR MORE UNITS, PARTICIPATION IN THE PRAXIS QUALITY
INSTALLATION ASSURANCE PROGRAM IS MANDATORY FOR ACTIVATION OF PRODUCT WARRANTY.
ATTENTION PLUMBING CONTRACTOR!!!
No modifications accepted (Packaged units only)
Recessed receiver flange to allow drywall flush
to unit. (Optional feature will add 2” to the
overall width of the product.)
*
*With optional recess receiver flange, add 2”