Holder C-Trac 4.74 - Manual (Page 183)

C 4.74
Operating instructions
182 149 443
Maintenance every 1000 hours
1
Bild_C258
Lubricating the cardan joint nipples
- Steer the vehicle as far as steering stop.
CAUTION
Carry out services in the articulated joint area
only with the engine shut off.
- Move centre cardan shaft (1) with starter until grease
nipples are easily accessible.
CAUTION
Make sure no-one is standing in the area of
the articulated joint when the starter is oper-
ated.
- Grease the cardan shaft and cardan joints.
CAUTION
Do not inject too much grease to prevent
damage to the seal.