Holder C-Trac 4.74 - Manual (Page 114)

Operating instructions
149 443 113
C 4.74
Other activities
2
1
Bild_C196
Km/h 0000000 h
25
15
FRONT
540U/min
1000U/min
20
5
10
30 RPMx100
PTO
electronic
0
Motor
digital system
1
2
3
4
Bild_C197
Lights
Turning on and operating the lights
NOTE
Turn the preheat/starter switch to position 1.
- Set the light switch (2) to position 1.
The front clearance lights (3,6) and the tail lights
(10,14) (parking light) are switched on.
- The clearance light indicator (3) in the multifunctional
display will come on.
- Set the light switch (2) to position 2.
The front headlights (1, 8) (dip beam) are turned on.
Turning on high beam
- Set the light switch (2) to position 2.
- Move the turn signal lever (1) down. The headlights
(2, 7) are set to high beam.
- The high beam indicator (4) in the multifunctional
display will come on.
NOTE
To use the headlight flasher, pull the turn sig-
nal lever up.