Switching source signals, Adjusting the volume, Switching source signals adjusting the volume – HANNspree LIQUID CRYSTAL DISPLAY WT04-12A1 User Manual

Page 28

Switching Source Signals

Press the

SOURCE

button on the

remote control or the

button on

the control panel to select the
incoming source signal.

The current source setting CH xx
appears on the top left corner of
the screen, AV1 or AV2 appears
on the bottom right corner of the
screen.

Note:

The TV supports S-Video input in addition to normal video and audio sig-
nals. The TV detects the signal type automatically and gives priority to S-
video when two signals are detected at the same time. This auto detection
function is only available for AV2.

Adjusting the Volume

Press the

VOL UP button

to increase

the volume. Press

VOL DOWN

decrease the volume. The volume
level is displayed on the TV.

Press the

MUTE

button on the

remote control to turn the sound off.
The word “Mute” appears on the top
left corner of the screen and sound is
temporarily turned off.

Press the

MUTE

button on the

remote control or press

VOL UP but-

ton or VOL DOWN button

to restore

the original volume.

C H 4 0

TV/AV

Current source setting

Volume up

Volume

down

Mute