Charging the main battery, To power a terminal and charge its main battery, Charging the main battery -7 – Hand Held Products 9550 User Manual
Page 199: E sc
Dolphin® 9500/9550 Mobile Computer User’s Guide
10 - 7
Charging the Main Battery
The Dolphin HomeBase powers the terminal and fully charges its main battery pack in less that four hours. The HomeBase
contains an intelligent battery charging system that protects the battery from being damaged by overcharging; the unit senses
when a battery pack is fully charged and automatically switches to a trickle charge that maintains the battery at full capacity.
Therefore, Dolphin terminals may be stored in the HomeBase without damage to the terminals, battery packs, or peripherals.
To check battery power, use the Power system setting; see
For more information about HHP Li-ion batteries, see
To Power a Terminal and Charge its Main Battery
1. Install the battery pack in the terminal; see
1. Connect the HomeBase to the power supply provided by HHP.
2. Slide the terminal into the terminal well until the Dock LED lights green to indicate that the terminal is
properly seated.
3. The battery pack begins charging.
Charging a Spare Battery Using the Auxiliary Battery Well
The auxiliary battery well located on the back of the HomeBase charges a spare battery independently
of the terminal well. The Aux Battery LED on the front panel indicates the status of the battery in this well.
Charge time is less than four hours.
1. Insert the end of the battery without the locking tab into the bottom of the auxiliary well opening.
2. Snap the battery into place with a hinging motion. The Aux Battery LED lights orange.
3. Use the AUX Battery LED to monitor charging progress.
DOC
K
AUX
BATTE
RY
COMM
D OL P
H IN
9 5 00
SCAN
E SC
TA B
SF T
A
B
C
E
F
G
I
J
K
M
N
O
S
R
Q
U
V
W
Y
Z
D
H
L
P
T
X
N UM
E NT
1
2
3
7
8
9
4
5
6
;
:
*
@
F1
F2
F3
F4
F5
F6
F7
F8
START
INS
BKSP
DEL
CTRL
ALT
SEND
END
POWER
VOL
PG
VO
L
PG
+
+
-
0
,
SP