Hand Held Products 9550 User Manual
Page 115
Dolphin® 9500/9550 Mobile Computer User’s Guide
7 - 7
To Modify a Profile
Select one and tap the Edit icon. The following screen displays:
SSID
To enter an SSID, which is the Network Name. Check with your network administrator for Network
Name (SSID).
Type
Choose Peer-to-Peer or Access Point from the drop-down list. Peer-to-Peer mode is used for
communication between two (or more) radio stations (cards) without an access point. Access Point
mode is also called “Infrastructure” mode.
TX Rate
Choose the transmit rate from the drop-down list - 1MB, 2 MB, Auto 1/2 MB, 5.5 MB, 11 MB, or Fully
Auto. The transmit rate is set to Fully Auto by default.
Chan
Scroll to select a channel for communication.
WEP Parameters
In this section, you configure the WEP Key for secure wireless communication. Within this block, you
configure the WEP Method, Encryption Key, and Key ID.
Use Manual Key
Manually input the encryption code for the WEP Key. This is the default setting.
WEP Method
The options in this drop-down list determine what characters can be used to create the Encryption
Key. Select one of the following five:
Encryption Key
Character sets differ depending on the selected WEP method and key format.
Key ID
Choose from the available options: Key 1 (Default), Key 2, Key 3, or Key 4. Check with your network
administrator for the WEP Key and Key ID you need to use.
Cancel
Tap this button to close the window without saving or modifying the profile.
OK
Tap this button to make the change.
Note: The SSID, Type, TX Rate, and Channel fields are unchangeable in Access Point mode, whereas TX Rate and Channel
fields can be changed in Peer-to-Peer mode.
Option
This option means that …
Disabled
WEP Key Off
64 bit (HEX)
up to 10 characters are configurable in Hexadecimal for Encryption Key
64 bit (ASCII)
up to 5 characters are configurable in ASCII for Encryption Key
128 bit (HEX)
up to 26 characters are configurable in Hexadecimal for Encryption Key
128 bit (ASCII)
up to 13 characters are configurable in ASCII for Encryption Key
HEX - Hexadecimal is a set of 16 characters from 0-9 and from A(a)-F(f).
ASCII - ASCII means any printable ASCII character can be typed.