HP 2600n - Manual (Page 16)

Control panel message Description Recommended action
Unauthorized
supply in use
alternates with
Ready
The supplies gauge will display the
consumption levels of print cartridges.
A new supply has been installed that is not
made by HP and was overridden. If you believe you purchased an HP supply,
please call the HP fraud hotline at
1-877-219-3183. Service or repairs
required as a result of using non-HP
supplies is not covered under HP warranty.
One of the following messages may display:
Unauthorized yellow
Unauthorized magenta
Unauthorized cyan
Unauthorized black
A new supply has been installed that is not
made by HP. One of these four messages
is displayed until an HP supply is installed
or ( S ELECT ) is pressed.
If you believe you purchased an HP supply,
please call the HP fraud hotline at
1-877-219-3183. Service or repairs
required as a result of using non-HP
supplies is not covered under HP warranty.
To continue printing, press ( S ELECT ).
Status messages
Status messages are used to inform the user of the current state of the system. Status messages do
not require user action or acknowledgement, and are for information only.
Control panel message Description Recommended action
Calibrating... The printer is calibrating. No action is required.
Cleaning... The printer is in cleaning mode. No action is required.
Status log only messages
The following messages are not displayed on the control panel. They are printed on the Status log.
Table 6-2 Status log only messages
Error log code Description
54.06 Color density sensor error
54.10 Color plane registration sensor(s) error
54.11 Yellow density out of range
54.12 Magenta density out of range
54.13 Cyan density out of range
54.14 Black density out of range
www.partshere.com Partshere Troubleshooting www.partshere.com Partshere Troubleshooting