Installing the software from windows 95 – Epson 5000XB User Manual
Page 80
4 • Using the ELP Link II Software
62
Installing the Software from Windows 95
Perform the following steps to set up the software:
1. Insert the Link II for Windows installation diskette into a diskette
drive (A: or B: as appropriate).
2. Click Start.
3. Click the Run menu option. The Run dialog box appears:
4. Type A:\SETUP (or B:\SETUP as appropriate), then press Enter
or click OK. The ELP Link II introduction appears. Press C to
continue.
5. To accept the default location for where the software should be
installed, press C to continue. Otherwise, enter a new directory
name and then press C.
6. The Link II software communicates with the projector using the
computer’s serial communication (COM) port. Specify which
COM port to use, then press C to continue. (Most likely, your
computer is using COM 1.)
pro-ch4.fm Page 62 Monday, November 10, 1997 1:37 PM