Epson 5000XB - Manual (Page 34)

1 • Installation 16
Connecting to a Desktop Macintosh
Before beginning, turn off the projector and Macintosh if they are on.
1. Connect the video cables.
Note: Macintosh computer configurations vary. See your computer
manual for the location of the ports needed to connect your projector.
a. Connect either end of the video cable to the projector’s
Computer In 1 port. (Use the Computer In 2 port if you are
connecting a second computer.)
b. Remove the small cover and set the DIP switches on the
Macintosh desktop adapter in accordance with the resolutions
you want to use (such as 16 inch mode).
video-out cable (if
supplied by Apple)
Macintosh
desktop
adapter
Macintosh desktop adapter
video cable
pro-ch1.fm Page 16 Friday, November 7, 1997 5:22 PM