Epson 5000XB - Manual (Page 36)

1 • Installation 18
2. Connect the main cable. The main cable connects the mouse cable
(needed to use the remote control as a mouse) and serial cable
(needed to use the ELP Link II software) from your Macintosh to
the projector.
a. Connect the small end of the main cable to the projector’s
Mouse/Com 1 port. (Use the Mouse/Com 2 to connect a
second computer.)
b. Connect the MAC mouse cable to the mouse terminal on the
other end of the main cable.
main cable
MAC mouse
cable
MAC serial
cable
pro-ch1.fm Page 18 Friday, November 7, 1997 5:22 PM