Epson 5000XB - Manual (Page 52)

2 • Using the Projector 34
If you need to raise or lower the image on the screen, extend or retract
the adjustable foot at the bottom of the projector as follows:
1. Stand behind the projector and support the front of it while you
press the purple button above the lens. This unlocks the adjustable
foot so it can move up and down. Don’t let the projector drop.
✦
Caution: Don’t hold the projector by its lens. This can damage
the lens.
2. While pressing the purple Foot Release button, raise or lower the
projector until the screen image is correctly positioned.
3. Release the Foot Release button to lock the adjustable foot in its
new position.
4. Locate the dial-shaped foot at the rear of the projector. Level the
projector by turning this foot clockwise to raise the height or
counterclockwise to lower it.
foot release button
adjustable foot
pro-ch2.fm Page 34 Monday, November 10, 1997 1:36 PM