Epson 5000XB User Manual
Page 35
Connecting to a Computer
17
c. Connect the small terminal of the Macintosh video adapter to
the other end of the video cable.
d. Disconnect the monitor cable from the video port on the back
of the Macintosh and connect the video cable (with Macin-
tosh video adapter attached) to the video port. If a video-out
cable was supplied with your Macintosh, connect one end to
the video adapter and the other end to the video port on your
Macintosh.
e. If you wish to view or check images on the computer’s
monitor, attach the Macintosh monitor adapter to the
monitor cable and connect the monitor to the projector’s
Monitor port.
f. Tighten the screws on both connectors to make sure they are
fastened securely.
pro-ch1.fm Page 17 Friday, November 7, 1997 5:22 PM