Epson 3260 - Manual (Page 52)

Caution:
If you lower the paper-release lever while
continuous paper
is still loaded, the printer beeps and the READY
light goes
off. If this happens, raise the pap-release lever and press
the FF and FONT buttons at the same time to reverse the
paper to the paper-part position. You can then lower the
lever again.
3. The printer is ready to print. When it receives data, it
automatically loads a single sheet from the paper cassette
and begins to print.
Switching to continuous paper
To switch from single sheets back to continuous paper, follow
these steps:
1. If a single sheet is in the paper path, p&s the
FF
button to
eject it.
2. Push the paper-release lever firmly into the continuous-paper
position.
Caution:
If you raise the paper-release lever when a single sheet is in
the paper path, the printer beeps and the READY light goes
off. In this case, lower the paper-release lever and press FF
to eject the page completely. You can then raise the lever
again.
3. The printer is ready. When the printer receives data, it loads
continuous paper from the push tractor automatically and
begins to print.
2-14
Paper Handling