Character tables, A-23, Appendix a-23 – Epson 3260 User Manual

Page 105

Character Tables

These character tables are selected with the default setting mode or by

using a software command. All the tables are the same for hex codes 00

through 7F. Therefore, only first table is shown completely. The rest of the
tables show only the characters for hex codes 80 through FF.

For all character tables except the italic character table, the ESC 6 and

ESC 7 software commands

let you select whether hex codes 80 to 9F are

characters (ESC 6) or control codes (ESC 7).

The tables with an * after the table name are available in the European
version only.

PC 437 (USA, standard Europe)

Appendix A-23