Using software programs, Microsoft whdows 3.1 and all windows programs – Epson 3260 User Manual

Page 33

Text mode
Original mode

Plug the other end of the cable into the computer. If there is a
ground wire at the computer end of the cable, attach it to
the ground connector at the back of the computer.

Note:

If you want the power cord or interface cable to be on the opposite side,

route it through the slot on the back

Using Software Programs

To take full advantage of your printer’s features, find the

instructions for your software programs below. Also see the

software tips at the end of this chapter.

Microsoft Whdows 3.1 and all Windows Programs

If Windows is already installed on your system, follow the

steps below to set it up with your printer. Then your printer

will work correctly for all your Windows programs, such as
Word for Windows, Lotus'1-2-3-' for Windows, and

CorelDRAW.'

Setting Up the Printer

1-19