Using the fear-off feature – Epson 3260 User Manual

Page 48

Each time you turn on the printer with paper loaded, it
reverses the continuous paper to the paper-park position
and then advances it to the next top of form. Always
remove your printed sheets before you turn off the printer
to keep the top-of-form position accurate.

You can adjust the top-of-form position temporarily. Open
the printer cover and turn the gear marked by + and -

signs to adjust the position. This adjustment is lost when

you turn off the printer or feed the paper backward to the

paper-park position by pressing the

and

FONT

buttons

at the same time.

Using the fear-off feature

When you use continuous paper, the tear-off feature makes it

easier to tear off the last printed sheet and saves the paper
normally lost between documents.

Note

You can tell the printer to feed the perforation of your paper to either

the edge of the printer cover or approximately eight centimeters (three

inches) beyond by setting the tear-off feature as described in Chapter 3.

2-10

Paper Handling