Edirol R-4Pro - Manual (Page 41)

41
Playing back
After performing the steps described in “Connections before playback” (p. 37) and “Setup before
playback” (p. 39), proceed as follows.
1
Select the project that you want to play.
From the Main screen, press the [ENTER/FINDER] button. In the Finder screen that appears, use the
[CURSOR] up/down buttons and the [SCRUB] dial to select a project. For more about the Finder
screen, refer to “Finder functions” (p. 44).
Alternatively, you can use the [PREV] button or [NEXT] button on the front panel to select the project
you want to play. The projects are in alphabetical order.
2
Press the [PLAY] button.
The selected project will play.
3
Slowly raise the [MONITOR] level knob to the desired volume for listening.
* Projects with names beginning with “.” are ignored, and will not be shown.
* Projects whose filename extension is not .pjt or .wav will be ignored and will not be shown.
Playing back
Normal playback
R-4_e_new.book 41 ページ ２００６年１１月２０日 月曜日 午後１時９分