Anti-theft lock, P.37, Installing the wire lock – Epson EB-G5200W User Manual
Page 37
Security Functions
37
B
Select either "Full Lock" or "Partial Lock".
C
Select "Yes" when the confirmation message is
displayed.
The control panel buttons are locked according to the setting you
chose.
Anti-Theft Lock
As the projector is often setup on ceiling mounts and left in rooms
unattended, it is possible that someone may try and take the projector, so
the projector includes the following security devices.
• Security slot
The security slot is compatible with the Microsaver Security System
manufactured by Kensington. You can find details about the Microsaver
Security System on the Kensington homepage
.
• Security cable installation point
A commercially available theft-prevention wire lock can be passed
through the installation point to secure the projector to a desk or pillar.
• Screw to fix the lens unit removal button
The lens removal button can be locked so that the projection lens cannot
be removed immediately with the screw supplied.
f
Installing the wire lock
Pass an anti-theft wire lock through the installation point.
See the documentation supplied with the wire lock for locking
instructions.
q
You can release the control panel lock by one of the
following two methods.
• From the remote control, select "Off" in "Settings" -
"Control Panel Lock" from the configuration menu.
• Press and hold down the [Enter] button on the control
panel for about seven seconds, a message is displayed and
the lock is released.