Epson EB-G5200W - Manual (Page 112)

112 ESC/VP21 Commands
Command List
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error message
is output and a ":" is returned.
* Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
Item Command
Power ON/OFF ON PWR ON
OFF PWR OFF
Signal selection Computer1 Auto SOURCE 1F
RGB SOURCE 11
Component SOURCE 14
Computer2 Auto SOURCE 2F
RGB SOURCE 21
Component SOURCE 24
BNC Auto SOURCE BF
RGB SOURCE B1
Component SOURCE B4
Video1 SOURCE 45
Video2 SOURCE 41
S-video SOURCE 42
HDMI SOURCE 30
EasyMP(EB-
G5350/G5150 only) SOURCE 50
A/V Mute ON/
OFF ON MUTE ON
OFF MUTE OFF
A/V Mute
selection Black MSEL 00
Blue MSEL 01
Logo MSEL 02
Item Command