GE Zoneline UltimateV10™ 8,900 BTU Vertical Terminal Air Conditioner Owners Guide - Manual (Page 26)

49-5000561 Rev. 2
Setting the auxiliary control
AUXILIAR
Y
CONTROLS
Mode 3 Freeze Sentinel / Heat Sentinel
With power to the unit and Freeze Sentinel activated,
the unit automatically provides heat without user
LQWHUIDFH7KLVSUHYHQWVSRWHQWLDOSOXPELQJGDPDJHE\
turning the heater and indoor fan ON DWž)DQGWKHQ
OFF RQFHWKHFORVHWWHPSHUDWXUHUHDFKHVž)
When Heat Sentinel is activated, the unit automatically
SURYLGHVFRROLQJZLWKRXWXVHULQWHUIDFH7KLVSUHYHQWV
DQH[FHVVLYHO\KRWURRPE\WXUQLQJWKHDLUFRQGLWLRQHU
ON DWž)DQGWKHQ OFF once the room temperature
UHDFKHVž)
Press MODE until a 3 appears in the first digit of the
display for Freeze Sentinel mode. Press the - pad for
OFF ³
ɉ
´RUWKH + pad for ON ³ ɉ ´7KLVLVVKRZQLQ
the second digit of the display. Press MODE again to
access the Heat Sentinel settings. Press the - pad for
OFF ³
ɉ
´RUWKH + pad for ON ³ ɉ ´3UHVV AUX SET
WRORFNLQ\RXUVHOHFWLRQDQGH[LW AUX SET mode, or
press MODE to continue setting other functions.
,QWKHGHIDXOWVHWWLQJIRU0RGH Heat Sentinel is off,
Freeze Sentinel is on.
NOTE: 7KHVHIXQFWLRQVDUHDFWLYHZKHQHYHUWKHXQLWLV
plugged in, even if the unit is turned off.
Freeze Sentinel OFF
Freeze Sentinel ON
Heat Sentinel OFF
Heat Sentinel ON
Mode 4 Constant ON Fan
Press MODE until a 4 appears in the first digit of the
display to set the fan to run continuously at high speed
- even if the unit is turned off.
Press the - pad for OFF ³
ɉ
³RUWKH + pad for ON ³ ɉ ´
7KLVLVVKRZQLQWKHVHFRQGGLJLWRIWKHGLVSOD\
Press AUX SET WRORFNLQ\RXUVHOHFWLRQDQGH[LW AUX
SET mode or press MODE to continue setting other
functions.
7KHGHIDXOWVHWWLQJIRU0RGHLV OFF .
Constant
Fan OFF Constant
Fan ON