Operation instructions - standard operation, Heating cooling – LG Simple Remote Controller Thermostat Use and Care Guide User Manual
Page 5
8
DESCRIPTION
ENGLISH
OPERATION INSTRUCTIONS - Standard operation
9
ENGLISH
Function
Icon
Description
Tempera-
ture
Current temperature
- Display current room temperature.
Cooling set point temperature
- Temperature set point for cooling operation.
Heating set point temperature
- Temperature set point for heating operation.
Fan speed
Displays current fan speed
POW : Fan speed - Power
AUTO : Fan speed - Auto
HI : Fan speed - High
MED : Fan speed - Medium
LO : Fan speed - Low
SLO : Fan speed - Weak
Controller
mode
Set back operation mode
- Controller operates set back operation.
Override mode
- Occupied/Unoccupied state change.
Product
state
monitoring
Command received from central controller or outdoor unit.
Slave indoor unit on a heat pump system prevents changing to a mode
not compatible with the current outdoor unit mode.
Outdoor unit running.
Indoor unit pre-heating operation running.
Defrost operation running.
Function
setting
Override timer setting step.
Setback cooling / heating temperature setting step.
It is displayed when is setting.
Press button several times until the de-
sired mode is selcected.
Whenever pressing the button, the selected
operation mode is changed as Auto -> cool-
ing -> Dehumidification -> Heating -> Fan ->
Auto··· .
NOTE
!
• Setting temperature range is as below.
- Cooling : 64°F ~ 86°F(18°C ~ 30°C)
60°F ~ 86°F(16°C ~ 30°C)
(For some models)
- Heating : 60°F ~ 86°F(16°C ~ 30°C)
h
If connecting to indoor unit with
dual set point function.
Cooling : 50 ~ 99 °F (10 ~ 37.5 °C)
Heating : 40 ~ 90 °F (4 ~ 32 °C)
• Heating mode is not available for cool-
ing exclusive models.
Cooling mode
Set temperature is lower than room
Temperature.
Heating mode
Set temperature is higher than room
temperature.
1
Adjust the desired temperature by press-
ing buttons.
Temp[°F]
Set temp[°F]
Room temp[°F]
Temp[°F]
Set temp[°F]
Room temp[°F]
Heating
Cooling
OPERATION INSTRUCTIONS - Standard operation
1,MFL62862020,영영 2018. 1. 3. 영영 1:01 Page 8