Whirlpool 27 Inch Ventless Electric Dryer Installation Instructions - Manual (Page 18)

18
7.
Reinstall latch on opposite side
Using a T25 ® screwdriver, reinstall the latch plate on the
opposite side from which it was removed with the four screws
removed earlier.
6.
Remove latch
Flip and rotate the inner door 180° so that the thin section is
at the top and the thick section is at the bottom. Using a T25 ®
screwdriver, remove the four screws securing the latch plate
in place.
8.
Reinstall hinge assembly on opposite side
Flip over the inner door to the left. Using a T20 ® screwdriver,
reinstall the hinge assembly on the opposite side from which
it was removed.
DOORS WITH LCD SCREEN:
9.
Remove rotating assembly
Lift off inner door assembly. Using a Phillips screwdriver,
remove the two screws securing the rotating assembly
to the door.
Latch
Thin section
Thick section