Eagle Electronics FISHEASY 240 - Manual (Page 70)

64
Shallow Alarm
To set the shallow alarm depth, press
MENU DOWN
repeatedly until
S
HALLOW
A
LARM
appears.
Shallow Alarm menu.
Press
UP ARROW
to increase the shallow alarm's depth setting or press
DOWN ARROW
to decrease it. The number in the shallow alarm’s menu
box shows the current shallow alarm setting. When the number
reaches the desired setting, press
PWR
to clear the menu. When the
bottom depth goes shallower than the alarm’s setting, an alarm tone
sounds and a message box appears on the screen.
Press
UP ARROW
to silence the alarm. This turns the alarm sound off
until the shallow alarm is triggered again.
To turn the alarm off, press
MENU DOWN
repeatedly until
S
HALLOW
A
LARM
appears. Press
DOWN ARROW
until the words
O
FF
F
EET
appear,
then press
PWR
to clear the menu.
Deep Alarm
To set the deep alarm depth, press
MENU DOWN
repeatedly until
D
EEP
A
LARM
appears.
Press
UP ARROW
to increase the deep alarm's depth setting or press
DOWN ARROW
to decrease it. The number in the deep alarm’s menu box