Eagle Electronics FISHEASY 240 User Manual

Page 67

At right, Scroll Speed menu at default 60 percent setting. At left, Scroll

Speed menu, with unit set to HyperScroll mode.

If you are running fast, try a HyperScroll setting of 80 to 100 percent.

When using HyperScroll, you may also need to manually decrease the

sensitivity for best performance. Depending on water conditions, Hy-

perScroll may cause a second bottom echo and large amounts of clutter

to appear on the screen. If this occurs, just decrease the sensitivity to a

level that eliminates the clutter. When you turn HyperScroll off, you

can return to your original sensitivity level.
Adjust scroll speed by pressing

MENU

until

CROLL

PEED

appears. Press

UP ARROW

to increase it and press

DOWN ARROW

to decrease it. Press

PWR

to clear the menu.

To return to the original setting, repeat the above steps, but use the

arrow keys to set the speed at 60 percent before clearing the menu.

Noise Reject and ASP

 (Advanced Signal Processing)

The ASP

 (Advanced Signal Processing) feature is a noise rejection

system built into the sonar unit. It constantly evaluates the effects of

boat speed, water conditions and electrical interference and automati-

cally gives you the best display possible under most conditions.