Eagle Electronics FISHEASY 240 User Manual

Page 39

Mount the unit in any convenient location, provided there is clearance

when it’s tilted for the best viewing angle. You should also make sure

there is enough room behind the unit to attach the power/transducer

cable. (See the following drawings, which show the dimensions of a

gimbal-mounted FishEasy 240 sonar unit.)
Holes in the bracket’s base allow wood screw or through-bolt mounting.

You may need to place a piece of plywood on the back side of thin pan-

els to reinforce the panel and secure the mounting hardware.
Drill a 1" (25.4 mm) hole in the dash for the power/transducer and ac-

cessory cables. The best location for this hole is immediately under the

gimbal bracket location. This way, the bracket can be installed so that

it covers the hole, holds the cables in position and results in a neat in-

stallation. Some customers, however, prefer to mount the bracket to the

side of the cable hole — it's a matter of personal preference.