Enterasys Networks BRIM-E6 - Manual (Page 27)

FINISHING THE INSTALLATION
BRIM-E6 USER’S GUIDE Page 21
Figure 3-5. The EPIM-X
3.2 FINISHING THE INSTALLATION
The BRIM-E6 is now ready for operation. Before placing the network
into service, test the installation thoroughly, making sure that you can
address all stations and that the BRIM-E6 and all stations are indicating
normal operation. Ensure that the networking software is configured
properly to match the installed network. If you encounter errors or
abnormal operation, contact Cabletron Systems Technical Support.
OFF Position
(Toward Front
of EPIM)
ON Position
(Toward Back
of EPIM)
OFF
ON