Ericsson T28z User Manual
Page 93
92
Accessories
5.
Enter a phone number including the area code (for example, your home
number) and press
Y E S
.
A number you used before may be suggested to you. If so, press
Y E S
to
choose the number, or enter another number.
6.
The message
Automatic activation on?
appears. Press
Y E S
.
The message
Profile: Home
appears to confirm your choice.
You can also make these settings later, if you wish. In this case, you need to
add the desktop charger to the Home profile, or another profile. See “To add
an accessory to a profile” on page 96. You may set the forward number in the
Edit Profile sub-menu, where all profile settings are included (
Settings
,
Y E S
,
Profiles
,
Y E S
,
Edit profile
,
Y E S
). See “Changing the profile settings” on page 88.
Note!
The phone must be switched on and the automatic activation must be on
for the phone to switch profile automatically when connected to an accessory.
Tip!
If you have several desktop chargers, they can each be added to a profile
or they can all be added to the same profile.
When you connect a specific Ericsson Portable Handsfree to the T28z, the Prt
Handsfree profile is set automatically. This means that all profile settings are
set to the values specified for the Prt Handsfree profile.
See “The Profile Concept” on page 87.
Tip!
If you do not want your phone to switch profile automatically when you
connect it to the Portable Handsfree, you need to turn the Auto activation
off. To do this, manually select the Prt Handsfree profile, and set the Auto
activation to off.
Using the Portable Handsfree
To answer an incoming call
•
When the phone rings, press the button on your Portable Handsfree once.
Tip!
You can also answer a call by using your voice. See “Voice Answering”
To end a call
•
Press the button on your Portable Handsfree once.
If the Call Waiting service is on, see “The Call Waiting Service” on page 65,
you can answer a second call by pressing the button on your Portable Handsfree.
Portable Handsfree