Ericsson T28z - Manual (Page 16)

Making and Receiving Calls 15
Automatic Redialing
If the connection failed when you first called and the display shows Retry? ,
you can redial the number by pressing Y E S . Your phone automatically redials
(up to 10 times)
• until the call is answered. When the call is successfully connected, you
hear a ring signal.
• until you press a key or receive a call.
Note! You do not need to take the phone to your ear until you hear the
ring signal.
Automatic redialing is not available for fax and data calls.
1. Press and hold the 0 key until a + sign appears.
The + replaces the international prefix number of the country from which
you are calling.
2. Enter the country code, area code (without the leading zero) and
phone number.
3. Press Y E S .
1. Enter 11 2 (the international emergency number, or in the Americas 9 11 ).
2. Press Y E S .
The international emergency number 112 (or 911) can normally be used in any
country, with or without a SIM card inserted, if a GSM network is within range.
Note! Some network operators may require that a SIM card is inserted, and in
some cases that the PIN code has been entered as well.
Some networks may not use the international emergency number 112 (or 911).
911 can also be used in areas that use 112 as the international emergency
number, and vice versa.
When you receive a call, the phone rings and the display shows Answer?
If your subscription includes the Calling Line Identification (CLI) service and
the caller’s network sends the number, you see the caller’s number in the
display. If the caller’s number and name are stored in the phone book, the
caller’s name is also shown.
If the incoming call is a restricted number, the display shows Private . If the
incoming call is a number without any CLI service, Unknown is shown.
Making International Calls
Making Emergency Calls
Receiving a Call
User busy
Retry?