Ericsson T28z - Manual (Page 12)

Display Information and Key Functions 11
Display Information and
Key Functions
In standby mode, the display shows the name of your operator, the time, the
signal strength and the battery power. Other icons appear if you receive any
messages, forward all your incoming calls, set the alarm clock and so on.
In this chapter, you will also learn about the key functions.
The table below shows and explains each icon which may appear in standby.
Display Information
Icon Name Explanation
Signal strength meter Tells you the strength of the
network signal.
Battery meter Tells you the status of the battery.
Missed call indicator You have missed an incoming call.
Forward indicator
Accept Some/None
indicator All incoming calls will be forwarded
to a defined number.
No calls or only certain calls from
numbers in a list are received.
Profile indicator Another profile than Normal has
been chosen.
Ring signal off indicator No sound can be heard when you
receive a call.
Alarm indicator The alarm clock has been set
and is on.
Silent indicator All audible signals are turned off,
except the alarm and timer.
SMS indicator You have received a text message.
Voice mail indicator You have received a voice message,
depending on your subscription.
Voice label in phone
indicator Indicates that voice dialing is set to
Start on Open.
Line 1 indicator Line 1 is in use for outgoing calls – if
you subscribe to the Two Line Service
Line 2 indicator Line 2 is in use – if you subscribe to
the Two Line Service.