Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater - Manual (Page 69)

VIVOTEK
User's Manual - 69
Privacy mask
Click Privacy Mask to open the settings page. On this page, you can block out sensitive zones to
address privacy concerns.
■ To configure privacy mask windows,
1. Select a mask color from the pull-down menu.
2. Enter a name for the mask window and click Add to add a new window.
3. A mask window with a light color frame will appear on screen, click and draw the corner to
change its size and drag it to a preferred location. If you install your camera on a PTZ scanner,
use the PTZ panel on the upper right to move to a different field of view. A masking window is
recommended to be slightly larger than the object (height and width) you want to cover.
4. You can also click and drag across the screen to draw a privacy mask. Click the Modify button if
you change the position of a privacy mask.
NOTE:
► Up to 5 privacy mask windows can be configured on the same screen.
► If you want to delete the privacy mask window, please click the ‘ Delete ’ button. To change an
existing Privacy mask, use select an existing mask from the menu, and use the Modify button.