Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater - Manual (Page 165)

VIVOTEK
User's Manual - 165
© 2020 VIVOTEK INC. All Right Reserved
10
Version Issue date Editor Comment
5. Add capability_ptz_c<0~(n-1)> group
6. Add capability_smartstream_version parameter
7. Remove capability_smartstream_supportquality and
capability_smartstream_supportmaxbitrate parameters
8. Modify the security level of eptz_c<0~(n-1)> group for fisheye
9. Remove the unused parameter:
camctrl_c<0~(n-1)>_horizontalalignment
V1.5c 2015/12/25 Kelly 1. Remove the unused baudrate: 110,300,600,1200,3600,7200 in
SD uart group.
2. Reserve the value 0 of motion_c0_win_senitivity for
compability.
3. Modify the cgi descriptions of Lens configuration.
4. Add Smart SD cgi descriptions in chapter 8.
V1.5d 2016/01/06 Kelly 1. Modify the cgi descriptions of camea control/preset
locations/recall in chapter 8.
V1.5e 2016/01/11 Kelly 1. Modify the descriptions of remotefocus.
2. Remove capability_image_c<0~(n-1)>_backfocus parameter.
V1.6a 2016/01/14 Kelly 1. Modify the value of privacymask3d_c<0~(n-1)>_color
parameter.
2. Remove camctrl_c<0~(n-1)>_osdzoom parameter.
3. Modify the description of SmartSD cgi in chapter 8.
V1.7a 2016/01/29 Kelly 1. Modify autotrack group to channel base.
V1.8a 2016/03/28 Kelly 1. Modify the descriptions of these parameters:
capability_daynight_c<0~(n-1)>_ircutsensitivity_type,
capability_daynight_c<0~(n-1)>_ircutsensitivity_supportlevel,
ircutcontrol_sensitivity,
network_rtsp_s<0~(n-1)>_multicast_ipaddress,
privacymask3d_c<0~(n-1)>_win_i<0~(m-1)>_pan,
privacymask3d_c<0~(n-1)>_win_i<0~(m-1)>_tilt
2. Add these parameters:
network_rtsp_s<0~(n-1)>_multicast_videoinipaddress,
network_rtsp_s<0~(n-1)>_multicast_audioipaddress,
network_rtsp_s<0~(n-1)>_multicast_metadataipaddress
V1.8b 2016/05/10 Kelly 1. Add hlc value type to these existing parameters:
capability_image_c<0~(n-1)>_exposure_winmode,
exposurewin_c<0~(n-1)>_mode,
exposurewin_c<0~(n-1)>_profile_i0_mode
© 2020 VIVOTEK INC. All Right Reserved
11
Version Issue date Editor Comment
2. Add smartsd value type to capability_supporttriggertype
parameter
3. Add these parameters:
ircutcontrol_extledmode,
camctrl_c<0~(n-1)>_focusmode,
capability_image_c<0~(n-1)>_exposure_hlcmode_affect,
capability_daynight_c<0~(n-1)>_extled_interface,
capability_camctrl_c<0~(n-1)>_focusmode,
capability_videoin_c<0~(n-1)>_rotationaffect,
capability_videoin_c<0~(n-1)>_minresolution,
capability_videoin_c<0~(n-1)>_mode<0~(m-1)>_eptz,
capability_videoin_c<0~(n-1)>_mode<0~(m-1)>_wdrpro,
capability_videoin_c<0~(n-1)>_mode<0~(m-1)>_minresolution
4. Add camera PTZ control group for IZ series
5. Modify the descriptions of these parameters:
action_goto_sync,
action_autotrack_enable,
capability_image_c<0~(n-1)>_wdrpro_affect,
capability_image_c<0~(n-1)>_wdrc_affect,
videoin_c<0~(n-1)>_aespeedsupportsensitivity,
videoin_c<0~(n-1)>_profile_i0_aespeedsupportsensitivity
V1.8c 2016/05/10 Kelly 1. Modify the value range description of these parameters:
videoin_c<0~(n-1)>_s<0~(m-1)>_resolution,
videoin_c<0~(n-1)>_s<0~(m-1)>_mjpeg_qvalue,
ircutcontrol_extledmode
2. Modify the description of roi_c<0~(n-1)> group
3. Modify the description of eptz_c<0~(n-1)>_s<0~(m-1)> group
4. Modify the value of camctrl_c<0~(n-1)>_cameraid
5. Modify the camctrl cgi for querying API.
V1.8d 2016/06/04 Kelly 1. Add these parameters:
capability_image_c<0~(n-1)>_exposure_hlcmode_supportwind
ow
2. Add getmaxratio/getmaxdratio parameters in the camctrl cgi
for querying API.
3. Modify the description of these parameters:
image_c<0~(n-1)>_gammacurve
image_c<0~(n-1)>_profile_i0_gammacurve