Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater User Manual
Page 36
VIVOTEK
36 - User's Manual
VIVOTEK INC. Logo
Click this logo to visit the VIVOTEK website.
Host Name
The host name can be customized to fit your needs. The name can be changed especially there are
many cameras in your surveillance deployment. For more information, please refer to System on page
Camera Control Area
Profile mode:
3 pre-configured streaming profiles are provided through here: Max. view,
Recording view, Live view. Each mode features a different stream source (channel), resolution,
multicast, and metadata configuration.
Manual Trigger
: Click to enable/disable an event trigger manually. Please configure an event
setting on the Application page before you enable this function. A total of 3 event configuration can
be configured. For more information about event setting, please refer to page 117. If you want to
hide this item on the homepage, please go to
Configuration> System > Homepage Layout >
General settings > Customized button
to deselect the “show manual trigger button” checkbox.
Heater Control
:
The heater control button allows you to manually turn on the embedded heater. You may want to
pre-heat the camera to prevent frost on the camera dome cover, etc. Note that the manual heater
control does not violate the preset temperature thresholds on the camera, e.g., heater automatically
starts at -10°C, and heater turns off at 26°C.
Digital Output
: Click to manually turn the digital output device on or off.
PTZ Control
: Select the Optical Zoom or the Mechanical PTZ control (if mounted on a scanner).
See PTZ configuration on page 117.
Zoom /Focus speed: Adjust the speed of zoom lens module with Zoom/ Focus actions when you
zoom in or zoom out.
Home
: Returns to the Home position if digital preset positions have been configured.
Zoom /Focus +/-: Allows you to manully zoom in/out and adjust the image focus. You can also use
your mouse wheel or buttons on a joystick to zoom in or zoom out.