Vadp settings for each package – Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater User Manual
Page 380

VIVOTEK
380 - User's Manual
© 2020 VIVOTEK INC. All Right Reserved
226
Maximum of n=10 hyperlink is supported.
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
moduleidx 0, integer> 1/7 Refer to the package index. title string[40] 1/7 Name of the vadp hyperlink. url string[120] 1/7 The URL address of vadp hyperlink. status string[40] 1/7 Value of “on” indicates a valid 7.38.2. VADP Settings for Each Package Group: vadp_module_i<0~(n-1)> for n VADP package number (capability_vadp_npackage > 0) n denotes the value of "capability_vadp_npackage". NAME VALUE SECURITY DESCRIPTION enable 6/6 Indicate if the module is enabled or name string[40] 6/6 Module name extendedname string[40] 6/6 Extended module name. If this value is url string[120] 6/6 Define the URL string after the IP vendor string[40] 6/6 The provider of the module. vendorurl string[120] 6/6 URL of the vendor. version string[40] 6/6 Version of the module. license string[40] 6/6 Indicate the license status of the licmsg string[128] 6/6 Indicate the message that will be show path string[40] 6/6 Record the storage path of the module.
connection of vadp hyperlink.
Value of “off” indicates a invalid
connection of vadp hyperlink.
(get/set)
not.
If yes, also add the index of this module
to the module_order.
not blank, it will be shown on the VADP
UI first instead of
vadp_module_i
address if the module provides it own
web page.
module.
on license status when mouse over.