Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater - Manual (Page 109)

VIVOTEK
User's Manual - 109
■ Disconnect: If you want to break off the current connections, please select them and click this
button. Please note that those checked connections will only be disconnected temporarily and
they will automatically retry a connection (IE Explorer or VLC Player).
Enable access list filtering: Check this item and click Save if you want to enable the access list
filtering function.
Filter
Filter type : Select Allow or Deny as the filter type. If you choose Allow Type , only those clients
whose IP addresses are on the Access List below can access the Network Camera, and exclude
the access from those that are not on the list. If you choose Deny Type , those clients whose IP
addresses are on the Access List below will not be allowed to access the Network Camera, while
those that are not on the list can.
Then you can Add a rule to the following Access List. Please note that the IPv6 access list column
will not be displayed unless you enable IPv6 on the Network page. For more information about
IPv6 Settings , please refer to Network > Enable IPv6 on page 83 for detailed information.
There are three types of rules:
Single : This rule allows the user to add an IP address to the Allowed/Denied list.
For example: