Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater - Manual (Page 359)

VIVOTEK
User's Manual - 359
© 2020 VIVOTEK INC. All Right Reserved
204
PARAMETER VALUE SECURITY
(get/set) DESCRIPTION
di 0,
integer>
6/6 Indicate the source id of di trigger.
This field is required when trigger
condition is “di”.
One bit represents one digital input. The
LSB indicates DI 0.
* Only available when "capability_ndi" >
0
mdwin 0,
integer>
6/6 Indicate the source window id of motion
detection.
This field is required when trigger
condition is “md”.
One bit represents one window.
The LSB indicates the 1
st window.
For example, to detect the 1 st and 3 rd
windows, set mdwin as 5.
mdwin0 0,
integer>
6/6 Similar to mdwin. The parameter takes
effect when profile 1 of motion detection
is enabled.
vi 0,
integer>
6/6 Indicate the source id of vi trigger.
This field is required when trigger
condition is “vi”.
One bit represents one digital input. The
LSB indicates VI 0.
vadp 0,integer> 6/6 Indicate the source id of vadp event
notification.
Each bit corresponds to one vadp source,
and the LSB indicates source id 0.
For example, to detect event from any
one of source id 0, 1 and 3, set vadp to
11.
* Only available when vadp is listed in
"capability_supporttriggertypes"
valevel 0,1 6/6 Select audio detection event.
0: not select
1: select
© 2020 VIVOTEK INC. All Right Reserved
205
PARAMETER VALUE SECURITY
(get/set) DESCRIPTION
valevel0 0,1 6/6 Select audio detection profile event.
0: not select
1: select
inter 1~999 6/6 Interval of snapshots in minutes.
This field is used when trigger condition
is “seq”.
weekday 0~127 6/6 Indicate which weekday is scheduled.
One bit represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on Friday
and Sunday, set weekday as 66.
begintime hh:mm 6/6 Begin time of the weekly schedule.
endtime hh:mm 6/6 End time of the weekly schedule.
(00:00 ~ 24:00 sets schedule as always
on)
lowlightcondition 0, 1 6/6 Switch on white light LED in low light
condition
0 => Do action at all times
1 => Do action in low-light conditions
action_do_i<0~(ndo-1)>_
enable 6/6 Enable or disable trigger digital output.
* Only available when "capability_ndo" >
0
action_do_i<0~(ndo-1)>_
duration 1~999 6/6 Duration of the digital output trigger in
seconds.
* Only available when "capability_ndo" >
0
action_cf_enable 6/6 Enable or disable sending media to SD
card.
* Only available when
"capability_supportsd" > 0