34 region of interest, 35 eptz setting – Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater User Manual
Page 373
VIVOTEK
User's Manual - 373
© 2020 VIVOTEK INC. All Right Reserved
218
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
autocleanup_mode targetbase,
sourcebase
6/6
Specify the automatic clean up method
for storage devices, where “targetbase”
indicate the automatic clean up is based
on the attached devices such as nas or sd
card, whereas “sourcebase” indicate
automatic clean up is based on the
selected recording track.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
autocleanup_enabled
6/6
Enable automatic clean up method.
Expired and not locked media files will be
deleted.
* For forward compatibility reservations,
but only group disk_i0_autocleanup is
effective.
* Not recommended to use this. Please
refers "autocleanup" group.
* This parameter will not be used after
the version number (httpversion) is equal
or greater than 0400a.
autocleanup_maxage
To specify the expired days for automatic
clean up.
* For forward compatibility reservations,
but only group disk_i0_autocleanup is
effective.
* Not recommended to use this. Please
refers "autocleanup" group.
* This parameter will not be used after
the version number (httpversion) is equal
or greater than 0400a.
© 2020 VIVOTEK INC. All Right Reserved
219
7.34
Region of Interest
Group:
roi_c<0~(n-1)>
for n channel product and m is the index of video stream which support ePTZ.
(capability_eptz > 0)
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
s<0~(m-1)>_home
1/6
ROI left-top corner coordinate.* If the
minimal window size is 64x64, then the
"win_i0_home"=(0~resolution_W-64,
0~resolution_H-64), which the resolution
is the value in current stream.
* If the stream doesn’t support ePTZ, the
permissions of this parameter must be
set as 1/7.
s<0~(m-1)>_size
1/6
ROI width and height. The width value
must be multiples of 16 and the height
value must be multiples of 8
* The minimal window size is 64x64, and
then resolution_W, resolution_H is the
value in current stream.
* If the stream doesn’t support ePTZ, the
permissions of this parameter must be
set as 1/7.
7.35
ePTZ Setting
Group:
eptz_c<0~(n-1)>
for n channel product.
(capability_eptz > 0)
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
osdzoom
1/4
Indicates multiple of zoom in is
“on-screen display” or not.
* Reserved for compatibility, and suggest
don't use this since [httpversion] > 0302a
* We replace
"eptz_c<0~(n-1)>_osdzoom" with "
videoin_c<0~(n-1)>_zoomratiodisplay".
smooth
1/4
Enable the ePTZ "move smoothly"
feature