Vivotek S Series IZ9361-EH 1080p Outdoor Network Bullet Camera with Heater User Manual

Page 421

VIVOTEK

User's Manual - 421

266

PARAMETER VALUE

DESCRIPTION

position

Motor’s position.
It works only if function=zoom or function= focus and
direction=direct.
: remote_focus_zoom_motor_start or
remote_focus_focus_motor_start,
: remote_focus_zoom_motor_end or
remote_focus_focus_motor_end replied from
"function=getstatus"

steps

1 ~ 30

Motor’s moving steps.
It works only if function=zoom or function=focus and
direction=forward and direction=backward.
* Motor will stop when it reaches to or
.
* This parameter is for additional fine-tune, the value is
from 1 to 30.

iris

N/A

Open iris or not.
It works only if function=auto or function=scan.

Syntax:

(for query API)

http://<

servername

>/cgi-bin/admin/remotefocus.cgi?channel=&[function=]

267

function

getstatus

Information of motors, return value as below:

remote_focus_zoom_motor_max

: Maximum steps of zoom

motor

remote_focus_focus_motor_max

: Maximum steps of focus

motor

remote_focus_zoom_motor_start

: Start point of zoom motor

remote_focus_zoom_motor_end

: End point of zoom motor

remote_focus_focus_motor_start

: Start point of effective focal

length

remote_focus_focus_motor_end

: End point of effective focal

length

remote_focus_zoom_motor

: Current position of zoom motor

remote_focus_focus_motor

: Current position of focus motor

remote_focus_zoom_enable

: Current function of zoom motor

remote_focus_focus_enable

: Current function of focus motor

remote_focus_iris_open

: The current status of iris. 0: irisenable,

1: irisopen
Current function of zoom/focus motor, return value as below:
0: no service
1: zooming
2. focusing
3: auto focus
4: focus scan
5: positioning (both zoom motor and focus motor)
12: reset focus

8.20

BackFocus

(capability_image_c<0~(n-1)>_remotefocus=4)

Note:

This request requires Administrator privileges.

Method:

GET/POST

Syntax:

(for control API)

http://<

servername

>/cgi-bin/admin/remotefocus.cgi?channel=&[function=][&direct

ion=][&position=][&steps=][&iris]

PARAMETER VALUE

DESCRIPTION

channel 0~"capability_nvideoin"-1 Channel of the video source.