Eclipse - Fujitsu Ten CD5444 - Manual (Page 99)

99
How to operate the Sound Adjustment Mode
[SEL] button [RTN] button
[SOUND] button
The merging of sound between the front and rear speakers and
the woofer can be improved by selecting the phase.
Switch the phase to a phase which lets the speakers combine
without any disharmony.
Turn the [SEL] button to select NON-FADER.
Press the [SEL] button.
The mode will change to phase selection mode.
Turn the [SEL] button to select NORMAL or REVERSE.
NORMAL: Normal phase
REVERSE: Reverse phase
Press the [RTN] button.
At this time, other adjustments can also be made in normal
mode.
Press the [SOUND] or [RTN] button to exit sound
adjustment mode. 5
4
3
2
1
Non-fader phase selection (NON-FADER)