Eclipse - Fujitsu Ten CD5444 - Manual (Page 33)

33
ESN security operating procedure
Insert the Memory Stick that has been recorded, and
then close the front panel.
The recorded data will read form the Memory Stick. 3
If the contents recorded in the Memory Stick match the
information recorded by the deck, [OK] will appear on
the display for two seconds, and then the deck will
return to normal operation. 4
ATTENTION
•If the contents recorded in the Memory Stick do not match the
information recorded by the deck, [ERR_] (ERR and the error
number) will appear on the display for two seconds, and then [-
- - -] (security code entry display) will appear. If this happens,
check the Memory Stick and repeat the procedure from step 2.
•If [ERR5] (the 5th time an error has occurred) appears, [HELP]
will appear. When [HELP] appears, carry out the operations for
an ESN security lock out by following the procedure in " What
happens if a Memory Stick or security code is incorrect?" on
page 34.
•ESN security lock cannot be canceled by this procedure if the
Memory Stick containing the security code is formatted.